5 Ways to Maintain Your Interlocking Stone Driveway

No doubt, protecting and maintaining your interlocking stone could be so much work especially when spring is approaching.

Oh yes! I can totally relate, but you can’t utterly ignore the fact that your interlocking stones actually need attention when the snow takes a break from filling the atmosphere with so much cold.

The kind of maintenance you carry out on your interlocking stone driveway is important because it would go a long way to save you the cost of paying for expensive damages.

Asides saving you cost, it would also ensure that your stonework looks great.

Hang in here and you’d find out five ways you can keep your interlocking stones looking good.

Use a Pressure Wash

In case you don’t have a clue on how to clean your interlocking stones, using a pressure washer is a good start.

Apart from this method being easy, it would keep your stone driveway looking just the way it looked when you installed it for the first time which is “perfect.”

When you opt for a pressure washer, you can be sure that it would get rid of any kind of salt build-up that contributes to corrode your stone driveway over time.

It also helps you clear out any winter stains or anything that result in your stone surface looking bad or permanently damaged.

Remove Any Stains

It’s almost impossible to avoid some kind of stains on your interlocking stones so the big question is what do you do?

The answer to this is quite simple because all you need is a stiff bristle broom, which would effectively take out any kind of greasy or non-greasy stain, alongside a dish detergent.

However, you can decide to substitute the dish detergent with other stone cleaning products, but you have to be careful with your choice because while some solutions are effective, some could cause serious damage to your stone driveway.

Ensure You Replace Any Missing Sand

When you newly install your interlocking stones, there is usually a bed of sand that accompanies the installation.

The reason why the sand is placed alongside the interlocking stone is that it ensures your stonework is safe.

Without them, you’d notice that your stones won’t sit which would eventually lead to a break or crack.

Hence, it’s important to replace missing sand immediately.

Take Time Out to Inspect the Stone Joints

The stone joints may have some space in between them that may increase over time, due to vehicle traffic or the stress of winter.

Once this occurs, the space in between would only keep increasing, thus, it’s important to inspect the interlocking stones from time to time.

Sometimes, the reason for space could be as a result of the stonework not having enough spikes added when it was installed initially. In this case, you can add more spike as needed.

Replace Any Cracked Stones

If by any chance you have cracked stones as a result of poor maintenance or a winter aftermath, it’s pertinent to replace it before it gets worse.

Final Word

It’s quite pretty to have interlocking stones installed on your driveway, but it comes with occasional maintenance if you plan to keep it looking really good over time.

However, if maintenance is too much work for you, it’s best to hire the service of a professional interlocking stone installer.

plumber in Woodbridge Previous post Why You Might Need a Plumber in Fredericksburg
Professional Residential Architects Next post 4 Workable Ideas to Hire a Professional Residential Architects in Toronto